find us on facebook
Bookmark and Share


C-type factory build C-type factory build C-type factory build C-type factory build C-type factory build C-type factory build C-type factory build C-type factory build chassis C-type factory build

We will be pleased to build a Suffolk C-type Jaguar at our works in Woodbridge.

Welcome to our SUFFOLK C-type factory build page.

Typically the project would be as follows.

Works visit to Woodbridge to inspect our facilities and discuss the proposed specification of the car.

Two models of C-type were built by Jaguar Cars. The 1951 car had 2 x SU carburettors and no bonnet air scoop. The 1953 car had 3x Weber Carburettors and an air scoop on the bonnet. Engine sizes can be exactly as the original 3.4 litres. However the 3.8 and 4,2 litre variants can be specified - all in various stages of tune.

Gearbox is usually the Jaguar Short Compact 4-speed with overdrive but some customers prefer the 5-speed Tremec gearbox.

Our car is dimensionally completely accurate having been especially moulded off C-type 039 with its undamaged original Jaguar works alloy body. Almost all the original Jaguar C-types have had replacement bonnets and other body parts in the past 50 years and we are fortunate to have totally correct body moulds to work from.

Bodywork is GRP with extensive alloy panelling, the GRP gives us entirely consistent and accurate bodywork with the considerable advantage of great strength.

Every effort is made to make the Suffolk C-types Jaguar as close to the original cars as possible. The devil is in the detail and we believe we have created an excellent reproduction.

Dynamically our car performs almost exactly as the original. Speeds up to 150mph are readily achievable. The car has rack and pinion steering with torsion bar front suspension. At the rear are trailing arms and a Panhard rod attached to a Jaguar live axle. A servo has been added to the all round 11 inch Lockheed disc brakes.

A safety collapsible steering column and adjustable pedals improve driver safety.

A slightly wider drivers seat is available and our car can accommodate drivers up to 6'6" without modification. Seat belts of either a 3 point or full harness are available. A club sport roll hoop is also available.

A factory built car takes 4-5 months to complete. Having agreed a fixed price based on the customers chosen specification payment would be usually be by 5 equal bank transfers as the build progresses.

Customers are welcome to visit us as we progress the work or can receive photographs of the build.